Laminated Board Substrate Material

Jul 12, 2022

The substrate thickness is between {{0}}.3-0.5 mm. Generally, the thickness of the base material of well-known brands is about 0.5 mm.


First grade

Aluminum-magnesium alloy also contains part of manganese. The biggest advantage of this material is its good oxidation resistance. At the same time, because of the content of manganese, it has a certain strength and stiffness, and is the most ideal material for smallpox. The performance of aluminum processing in the Southwest Aluminum Plant in China is the most stable.


Second grade

Aluminum-manganese alloy, the strength and stiffness of this material are slightly better than that of aluminum-magnesium alloy. However, the oxidation resistance is slightly lower than that of aluminum-magnesium alloys. If both sides are protected, it basically solves the disadvantage that its oxidation resistance is not as good as that of aluminum-magnesium alloy, and the aluminum processing performance of domestic West Aluminum and Ruimin Aluminum is the most stable.


Third grade

Aluminum alloy, which has less manganese and magnesium content. Therefore, its strength and stiffness are significantly lower than those of aluminum-magnesium alloys and aluminum-manganese alloys. Because it is soft and easy to process, as long as it reaches a certain thickness, it can basically meet the most basic flatness requirements of the ceiling. However, its oxidation resistance is obviously inferior to that of aluminum-magnesium alloys and aluminum-manganese alloys. Moreover, it is easy to deform during processing, transportation and installation.


Fourth grade

Ordinary aluminum alloy, the mechanical properties of this material are not stable.


Fifth grade

Recycled aluminum alloy, the raw material of this kind of plate is that the aluminum processing factory melts the aluminum ingot into an aluminum plate, and does not control the chemical composition at all. Due to the uncontrolled chemical composition, the properties of these materials are extremely unstable, resulting in severely uneven product surfaces, product deformation, and high susceptibility to oxidation.

In the use of new materials, electro-galvanized sheet is also used as the base material of film-coated sheet


Vous pourriez aussi aimer
在线客服